ASROCK H61M-HVGS EXTREME DRIVER DETAILS:
|File Size:||2.6 MB|
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* (*Free Registration Required)|
ASROCK H61M-HVGS EXTREME DRIVER
Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Combo Cooler Option C. Please be noticed that not Asrock H61M-HVGS Extreme the and CPU Fan can be used.
- Specifications - Asrock H61M-HVGS User Manual [Page 6]
- ASRock > Motherboard Compare Result
- MOBO Compatibility asrock h61m-vs r2.0
- Get In Touch
EuP, stands Asrock H61M-HVGS Extreme Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.
Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component.
Asrock H61M-HVGS Intel SATA Preinstall RAID Driver .
To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by Asrock H61M-HVGS Extreme edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.
Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
Open the socket: Step Disengaging Asrock H61M-HVGS Extreme lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees. Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service. Step 3. Insert the Pin CPU: Hold Asrock H61M-HVGS Extreme CPU by the edges where are marked with black lines.
Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.
UserBenchmark: Asrock H61M-HVGS Compatible Builds
Verify that the CPU is within the socket and properly mated to the orient keys. Step 4.
Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.
Secure load lever with load plate tab under retention tab of load lever. Below is an example to illustrate the installation of the heatsink for Pin CPU. Step 1. Apply thermal interface material onto center of Step 2. Place the heatsink onto the Asrock H61M-HVGS Extreme. Ensure IHS on the socket surface. Align fasteners with the motherboard throughholes. Supports Intel® Extreme Memory Profile (XMP) / with Intel® Ivy Bridge CPU. *Due to the operating system limitation, the actual memory size may be Asrock H61M-HVGS Extreme.
Thank you for purchasing ASRock H61M-HVGS / H61M-HVS motherboard, a reli- Supports Intel® Extreme Memory Profile (XMP) / with. Intel® Ivy.