ASROCK ZH77 PRO3 INTEL DISPLAY DRIVER DETAILS:
|File Size:||20.6 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
ASROCK ZH77 PRO3 INTEL DISPLAY DRIVER
Keep the lever positioned at about degrees in order to flip up the load plate.
Step 2. Locate Pin1 and the two orientation key notches.
ASRock ZH77 Pro3 Placa de baza Preturi ASRock ZH77 Pro3 Magazine
Hold the CPU by the edge which is marked with a black line. Carefully place the CPU into the socket.
Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Close the socket: Flip the load plate onto the IHS. Press down the load lever, and secure it with the load plate tab under the retention tab.
The protection cover will automatically come off by itself. Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
Please adopt the type of heatsink Asrock ZH77 Pro3 Intel Display cooling fan compliant with Intel Pin CPU to dissipate heat. Before you install the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPUs. Apply Thermal Interface Material Step 2. Place the heatsink onto the socket.
Align fasteners with the motherboard throughholes. Step 4.
|BLOOM Laser 1600+||To search drivers or utilities, select the motherboard model:|
|Dell Latitude V700 System||Compra con confianza|
|3Com 3CNJ220-BLK||Angaben zum Verkäufer|
|Gigabyte GA-8IP775 (rev. 1.x)||Compra con confianza|
|Biostar A58MDP Ver. 6.1 Realtek LAN||Select ASRock Motherboard ZH77 Pro3 driver for download|
Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.
Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5.
Asrock ZH77 Pro 3 Intel Sockel 1155 ATX Motherboard---overclocking i72700k???
Connect fan header with the CPU fan connector on the motherboard. Step 6. Secure redundant cable with tie-wrap to ensure the cable does not interfere with fan operation or contact other components.
- Asrock ZH77 Pro3 драйверы
- Drivers and utilites for ASRock motherboards - choice of model.
- Asrock ZH77 Pro3 драйверы
- Recommended Posts
Please be noticed that this motherboard Asrock ZH77 Pro3 Intel Display Combo Cooler Option C. For dual channel configuration, you always need to install identical the same brand, speed, size and chip-type DDR3 DIMM pair in the slots: If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots: It is not recommended to install them on this motherboard.
Unlock a DIMM slot by pressing the retaining clips outward. PCI slots: PCIE slots: Installing an expansion card Step 1. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged.
Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use. Max. shared memory MB with Intel® Sandy Bridge CPU - Two graphics output options: Support HDMI and D-Sub ports by independent Asrock ZH77 Pro3 Intel Display controllers. ZH77 Pro3 Supports Intel® HD Graphics Built-in Visuals: Intel® Quick Sync VideoIntel® InTru™ 3D, Intel® Clear Video HD Technology, Intel® Insider™.