ASROCK H81M INTEL RAPID START DRIVER DETAILS:
|File Size:||32.2 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
ASROCK H81M INTEL RAPID START DRIVER
Boot and security options Peripherals: Chipset and storage options Power Management: Power options OC: CPU and memory options Settings: Chipset, boot, and security options Hardware Monitor: System health and fan-speed options Adding to the confusion, the specific names for each setting may differ from one manufacturer to another.
This is the main system clock for the processor. If the motherboard supports changing this option, it provides is a universal way to overclock the processor, even if you don't have a processor that was marketed for it, such as Intel's non-K processors.
MOTHERBOARD ASROCK H81M-HDS LGA 1150 DDR3
However, since this affects everything on the processor, including memory controller and integrated GPU, you normally can't tweak this value very high before stability issues start. CPU Ratio: This allows you to change the frequency multiplier of the processor.
Normally, this only affects the cores themselves, and not the other parts of the processor, such as the memory controller or integrated GPU. Changing this value is the easiest way to overclock. However, this is only supported on the following processors: Intel's K or X suffix processors e.
ASRock H81M Intel Rapid Start the name suggests, this option is used to spread the electromagnetic interference EMI coming off the processor across a broader range of frequencies. This doesn't reduce the total amount of EMI, but it helps prevent all of it from being concentrated on the frequency of interest, namely the processor's clock frequency. This should normally be left on, although if you're doing some serious overclocking, it may help with stability to turn it off.
CPU Voltage: This is useful if you're overclocking, as higher clock speeds require higher voltages. However, approach this setting gingerly. Even a relatively small change about 15 percent can fry the CPU.
And note that frying doesn't ASRock H81M Intel Rapid Start to show any signs of physical damage to the part. As the name suggests, this is used for adjusting the processor's on-board PCI Express controller frequency. While it might be tempting to tweak this, thinking it could help with graphics, it won't actually do much for the graphics card.
- Support For H81M-P33 Motherboard - The world leader in motherboard design MSI Global
- SSD no longer detected in BIOS, but after reboot from Windows Tom's Hardware Forum
- Download Intel Rapid Start Utility
- How To: A Guide to BIOS Settings
- Experience Fast Like Never Before
- MOTHERBOARD ASROCK H81M-HDS LGA 1150 DDR3
It's best to leave this alone unless you've been touching BLCK, run into stability issues, and have run out of other options to tweak. Both options will adjust the clock frequency of the processor to lower frequencies if it's not doing much and bump it back up to normal if it becomes busy.
How To: A Guide to BIOS Settings PC Gamer
If you prefer to have your processor running at full speed all the time, disable this. C-State Options: The C states denoted by C State are ASRock H81M Intel Rapid Start power levels. These are useful to turn off when attempting extreme overclocking to keep the processor from switching power states. All of the Intel chipset's feature will not work until this software is installed, you'll even see an error in Device Manager until this software is installed. Difficult to describe, but it really matters.
Intel Rapid Storage Technology Driver can be dowloaded from the above. Free Download ASRock H81M Intel Rapid Start Utility for Windows Supports 4th generation Intel Core i7 / i5 / i3 / Xeon / Pentium.