ASROCK A55M-VS LAN DRIVER DETAILS:
|File Size:||11.0 MB|
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* (*Free Registration Required)|
ASROCK A55M-VS LAN DRIVER
Boot up your system. Enter Windows. It is listed at the bottom of driver list.
ASRock A55M-VS - motherboard - micro ATX - Socket FM1 - AMD A55 Specs
Please do not use the rear USB bracket to connect it on the rear panel. Multi-Angle CIR Receiver can receive Asrock A55M-VS LAN multi-direction infrared signals top, down and frontwhich is compatible with most of the chassis on the market. Please install it before you boot the system. Please refer to ASRock website for the motherboard support list: When the jumper cap is placed on pins, the jumper is Short. If no jumper cap is placed on pins, the jumper is Open.
The illustration shows a 3-pin jumper whose pin1 and pin2 Asrock A55M-VS LAN Short when jumper cap is placed on these 2 pins. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. Asrock A55M-VS LAN NOT place jumper caps over these headers and connectors.
Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! The current SATA2 interface allows up to 3. This is an interface for print port cable that allows convenient connection of printer devices.
ASRock A55M-VS Quick Installation Guide - Page 2
Each USB 2. This is an interface for the front panel audio cable that allows convenient connection and control of audio devices. Please follow the instruction in our manual and chassis Asrock A55M-VS LAN to install your system.
If you use AC97 audio panel, please install it to the front panel audio header as below: You dont need Asrock A55M-VS LAN connect them for AC97 audio panel. To activate the front mic. Select Mixer.
Select Recorder. Then click FrontMic.
Adjust Recording Volume. Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
Asrock A55M-VS Drivers
Connect to the power switch on the chassis front panel. You may congure the way to turn off your system using the Asrock A55M-VS LAN switch. Connect to the reset switch on the chassis front panel.
Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart. Connect to Asrock A55M-VS LAN power status indicator on the chassis front panel.
A55M-VS Advanced Micro Devices (19 views)
Asrock A55M-VS LAN The LED is on when the system is operating. The LED keeps blinking when the sys-tem is in S1 sleep state. Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard Asrock A55M-VS LAN activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly. Serial port Header 9-pin COM1 see Asrock A55M-VS LAN. STEP 1: STEP 2: STEP 3: STEP 4: What is Hot Swap Function? Please read below operation guide of Hot Plug feature carefully.
Points of attention, before you process the Hot Plug: Please follow below instructions step by step to reduce the risk of HDD crash or data loss. A55M-VS. Solid Capacitor for CPU Power; Support for Socket FM1 W Supports XFast RAM, XFast LAN, XFast USB; Supports AMD Steady Video™: New. ASRock A55M-VS - motherboard - micro ATX - Socket FM1 - AMD A55 LAN, PS/2 keyboard, PS/2 mouse, USBVGA, audio Asrock A55M-VS LAN, audio line-out.