Type: Driver
File Name:
File Size: 14.1 MB
38 (4.26)
Downloads: 30
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now

AP Launch: Launches the media application. Media Control Zone: Controls the media application. Product introduction 19 1.


Unplug the power cord from the wall socket before touching any component. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity Hold components by the edges to avoid touching the ICs on them. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply.

This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. Make sure to unplug the power Asus M2N-VM DH Motherboard before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below Screw holes Place six 6 screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard.

Place this side towards the rear of the chassis Chapter 1: Product introduction 21 1.

Should i get a new motherboard? - PC/Mac/Linux Society - GameSpot

If the instructions in this section do not match the CPU documentation, follow the latter. Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket pins are not bent. Keep Asus M2N-VM DH Motherboard cap after installing the motherboard. Locate the CPU socket on the motherboard.


Product introduction 23 2. Press the load lever with your thumb A and move it to the left B until it is released from the retention tab.

Detail Feedback Questions about on alibaba group

B A Load plate 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom left corner of the socket. The socket alignment key should fit into the CPU notch.

Close the load plate Athen push the load lever B until it Asus M2N-VM DH Motherboard into the retention tab. Under Linux, use the Hyper-Threading compiler to compile the code. If you are using any other operating systems, disable the Hyper-Threading Technology item in the BIOS to ensure system stability and performance. To use the Hyper-Threading Technology on this motherboard: BIOS setup. Reboot the computer Chapter 1: Product introduction 25 1. Install the motherboard to the chassis before you install the CPU fan and heatsink assembly When you buy a boxed Intel Pentium 4 processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, make sure that you use only Intel certified multi directional heatsink and fan.

Your Intel Pentium 4 heatsink and fan assembly comes in a push-pin design and requires no tool to install. To install the CPU heatsink and fan: Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the motherboard. Fastener Motherboard hole Make sure each fastener is oriented as shown, with the narrow groove directed outward. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.

ASUS M2N-VM DH, Socket AM2, AMD (90-MIB0P0-G0EAYZ) Motherboard

Hardware monitoring errors can occur if you fail to plug this connector Chapter 1: Product introduction 27 1. Rotate each fastener counterclockwise.

Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. Remove the heatsink and fan assembly from the motherboard.

Aopen DVD1648Installation is Easy with Fast & Professional Support
BRAVIS WXi89Damaged or outdated Motherboard drivers

Rotate each fastener clockwise to reset the orientation. Narrow end of the groove The narrow end of the groove should point outward after resetting. M2N-VM DH supports AMD Cool 'n' Quiet! Technology, which Asus M2N-VM DH Motherboard system operation and automatically adjusts CPU voltage and frequency for a cool and. M2N-VM DVI supports AMD Cool 'n' Quiet!

Technology, which monitors system operation and automatically adjusts CPU voltage and frequency for a cool and.

Related Posts