ARGOX DX-3200 PPLB WINDOWS 10 DRIVER

ARGOX DX-3200 PPLB DRIVER DETAILS:

Type: Driver
File Name: argox_dx_26481.zip
File Size: 10.8 MB
Rating:
4.75
8 (4.75)
Downloads: 3
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now
ARGOX DX-3200 PPLB DRIVER



Loose the three screws from Tear-off Bracket and then remove Tear Bracket. Tear Bracket screw 87 5. Insert the left side of cutter bracket 7 and secure the two screws 6 to the Argox DX-3200 PPLB module.

ARGOX DX-3200 PPLB DRIVERS FOR WINDOWS 8

Rotary Cutter Guillotine Cutter 88 6. For the XVL model, ignore this step. After the cutter is installed, install media and ribbon.

ARGOX DX-3200 PPLB DRIVER DOWNLOAD

Put the media end on the roller. Close the print head latch. Release the button when the cutter starts cutting.

Argox Manual

After cutting, the printer will feed the label for 8 inches. The procedure above is for first time installation or after cutter jam.

Normally the procedure for loading the media through the cutter is: Press the FEED Argox DX-3200 PPLB to feed the media end through the cutter. Then select proper settings via Seagull Driver for printer. Check X driver. Check the Cam as marked in Figure 1, find a slotted screwdriver to turn counter-clockwise as Figure 2.

Samsung S27B550V LED MonitorAsk a Question
Pioneer DJM-850-S Digital MixerDownload and update Windows drivers
D-Link DSB-V100Key Features of Argox X-3200 Industrial Barcode Printer
Compaq 321 Notebook Synaptics TouchpadArgox条码打印机最新驱动

During turning the Cam of cutter, release the blade from paper and them remove the paper from the cutter. Figure 1 Figure 2 93 Guillotine Argox DX-3200 PPLB with Paper Jam If there is paper jam inside guillotine cutter, check in Figure 1 and find where the screw under guillotine cutter.

Argox printer drivers NiceLabel

It is to control cut actions of guillotine cutter. Find a Phillips screwdriver to lay down the blade by turning the screw counter-clockwise.

Then paper can be removed from the cutter as Figure 2. Figure 1 Figure 2 94 Dispenser Installation Install a dispenser into the printer as follows: We corrected this translation to Abrisskante.

X-3200 (Successor model iX4-350)

This is corrected now. Everything that is send before the RFID command, prints fine.

Now we have change the print stream, that Argox DX-3200 PPLB command is always the last of all elements. User is now able to change administrator settings without reopening driver properties dialog as an elevated user. A click on the shielded button and entering the credentials is all that is needed. PrnInst can now be moved to any position second monitor and it will stay there.

It will not jump back to its original position. Argox DX PPLB Windows printer drivers by Seagull Scientific make it easy to print labels, cards and more from any true Windows program, including our. True Windows printer Drivers by Seagull™ can be used with any true Windows program, including Argox DX-3200 PPLB BarTender software for label design, label printing, barcode printing, RFID encoding and card printing.

ARGOX DX-3200 PPLB WINDOWS 10 DRIVERS

However, although BarTender will work with any properly written Windows driver.

Related Posts