KT&C EZHD-TRF4 RECORDER DRIVER DETAILS:
|File Size:||11.9 MB|
|Supported systems:||Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10|
|Price:||Free* (*Free Registration Required)|
KT&C EZHD-TRF4 RECORDER DRIVER
Install the DVR in a well-ventilated and dust-free area. Ensure environmental conditions meet factory specifications. Install a manufacturer recommended HDD.
KT-TRF4 DVR TVI-HD
Use brackets for rack mounting where applicable; otherwise, use a suitable rack shelf. Ensure there is ample KT&C EZHD-TRF4 Recorder for audio and video cables. When installing cables, ensure that the bend radius of the cables are no less than five times than its diameter. Connect both the alarm and RS cable. Allow at least 2cm 0. Ensure the DVR is grounded.
In Playback mode, the Up and Down button is used to speed up and slow down recorded video. In Live View mode, the directional buttons can be used to cycle through channels.
It KT&C EZHD-TRF4 Recorder also be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. Enter numeral 1 ; Access the main menu interface. Enter numeral 0 ; Switch between input methods upper and lowercase alphabet, symbols and numeric input. In Playback mode, this KT&C EZHD-TRF4 Recorder can be used to add the default tag.
Move the active selection in a menu. The inner KT&C EZHD-TRF4 Recorder will move the selection up and down; the outer ring will move it left and right. In Live View mode, it can be used to cycle through different channels. Openings for 16 BNCs exist; unused openings are closed with plastic covers.
Description of Rear Panel No. Display local video output and menu.
Connectors 16 for alarm inputs. Connectors 4 for alarm outputs. To connect the alarm input to the device, use the following diagram. To connect an AC load, jumpers should be left open you must remove the jumper KT&C EZHD-TRF4 Recorder the motherboard in the DVR. Use an external relay for safety as shown in the figure above. By default, jumpers are connected. To connect KT&C EZHD-TRF4 Recorder AC load, jumpers should be removed. Press and hold the orange part of the pluggable block; insert signal cables into slots and release the orange part.
Ensure signal cables are in tight. Connect pluggable block back into terminal block.
KT&C EZHD-TVL4 USER MANUAL Pdf Download.
Disconnect pluggable block from the RS terminal block. Make sure the DVR is grounded. Termination Switch Operation This function is applicable to certain models only.
- KNR-p4Px4/4TB IP Cameras Pinterest Videos, 4 channel and Surveillance system
- 4 Channel HD-TVI DVR
- KT&C KNC-HDBi IP Camera Firmware driver - Driversorg
- 4 Channel HD-TVI DVR
- IP Camera Systems
- KT&C EZHD-TRF16 manual
The termination switch is placed on the mainboard instead of the rear panel. Turn on the termination switches on the DVR and KT&C EZHD-TRF4 Recorder furthest speed dome.
Free kt 333 8235 download - kt 333 8235 driver - Top 4 Download
Keep other termination switches off. The connection diagram and status of KT&C EZHD-TRF4 Recorder termination switch are shown in the following figure. HD version of app, optimized for tablets, displays up to 16 live view cameras Free PC and MAC Clients support multiple device viewing, playback with digital zoom and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4: Storage space used is estimated by formulas and may have some deviation from actual value. To start the DVR: Check the power supply is plugged into an electrical outlet. Turn on the power switch on the rear panel; the Power indicator LED on the front panel should be yellow. To shut down the DVR: Enter the Shutdown menu. Real time recording on any/all channels at p, p, WD1 or SD resolution - Playback any/all 4 Ch, 8 TB EZHD-TRF4/16TB: 4 Ch, 16 TB.
: KT&C EZHD-TRF4 4 Channel HD-TVI DVR with No HDD AV 16CH Surveillance Digital Video Recorder HD-TVI/AHD H Full-HD DVR.