ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVERS FOR MAC

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVER DETAILS:

Type: Driver
File Name: allied_telesis_38007.zip
File Size: 18.6 MB
Rating:
4.06
6 (4.06)
Downloads: 7
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now
ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVER



The faceplate on the ATT adapter provides one twisted-pair connector for attaching the adapter to a compatible link partner.

ATT Faceplate 19 Chapter 1: Table 2. Installing the Hardware Reviewing Safety Precautions Please review the following safety precautions before you begin to install a network adapter card.

Network Adapters Allied Telesis

Do not look directly at the fiber optic cable ends or inspect the cable ends with an optical lens. This product is designed for a maximum ambient temperature of 40 degrees Allied Telesis AT-2712FX 100Mb Fiber Ethernet. Install this product in accordance with local and National Electric Codes. Before you remove the cover of your system, you must observe the following precautions to protect yourself and to prevent damage to the system components. The use of a properly grounded wrist strap or other personal antistatic devices and an antistatic mat is strongly recommended. Installing the Hardware Pre-Installation Checklist Before you install an adapter card, check the following list: Verify that your system is using the latest BIOS.

Note If you acquired the adapter software from the Allied Telesis support website, enter the path to where the adapter driver files reside on your system.

If your system is active, shut it down. When the system shut down is complete, power OFF and unplug your system. Holding the adapter card by the edges, remove it from its shipping package and place it on an antistatic surface. Caution Do not attempt to install a damaged adapter.

  • Vendors Affinity Systems
  • Network Adapters Allied Telesis
  • Allied Telesis -
  • Allied Telesis AT-2712FX / Network adapter / PCIe low profile / 10/100 Ethernet AT-2712FX/SC-001
  • Allied Telesis 100MBPS PCIE SCR FAST
  • Specifications

If Allied Telesis AT-2712FX 100Mb Fiber Ethernet adapter is damaged, report it to Allied Telesis. The ATT adapter is shipped with the standard bracket attached to the adapter. Depending on your PC, you may need to replace the bracket attached to your adapter. The following procedure describes how to remove the low-profile bracket from the adapter and replace it with the standard bracket.

Mbps Network Cards for PCI Express x1 eBay

You can also use this procedure to remove the standard bracket and replace it with the low-profile bracket. To replace the low-profile bracket with the standard bracket, perform the following procedure: Remove the screws that attach the bracket to the adapter.

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET DRIVERS WINDOWS 7

See Figure 5. TX RX 10 0 Figure 5.

Allied Telesis Board Level Electronic Parts Catalog

Removing the Low-Profile Bracket 25 Chapter 2: Installing the Hardware 2. Align the tabs of the standard bracket with the holes on the adapter and fasten the screws onto the adapter.

ALLIED TELESIS AT-2712FX 100MB FIBER ETHERNET WINDOWS 7 64BIT DRIVER

See Figure 6. TX RX 10 0 Figure 6. For details about performing these tasks on your particular system, refer to the manuals that were supplied with your system.

Asus Z87-EXPERT RSTMore information:
Lenovo ThinkPad X250 Sierra Wireless EM7345Shop with confidence
Asus MAXIMUS VIII HERO Intel RSTSecure ethernet network adapters, Installation and user’s guide

Note To perform this procedure, you need to supply a Phillips-head screw. Before installing the adapter, ensure the system power is OFF and unplugged from the power outlet, and that proper electrical grounding procedures have been followed. Warning High voltage inside the system presents a Allied Telesis AT-2712FX 100Mb Fiber Ethernet hazard. Safety Symbols Symbol Meaning Description Caution Performing or omitting a specific action may result in equipment damage or loss of data. Warning Performing or omitting a specific action may result in electrical shock.

You can view the documents online or download them onto a local workstation or server. Preface Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales or corporate information. You can use the Knowledge Base to submit questions to our technical support staff and review answers to previously asked questions.

Allied Telesis

Support Returning Products for return or repair must first be assigned a return materials Products authorization RMA number. For instructions on how to obtain an RMA number, go to the Support section on our web site at www. For Sales or You can contact Allied Allied Telesis AT-2712FX 100Mb Fiber Ethernet for sales or corporate information through Corporate our web site at http:FX Series. Fast Ethernet, PCIe Fiber Adapter, Secure Great for fiber to desktop networks that depend on secure and reliable systems; Advanced. FX. Fast Ethernet, PCIe Fiber Adapter, Secure Great for fiber to desktop networks that depend on secure and reliable systems; Advanced centralized.

Related Posts