TP-LINK TL-WA801ND V1 ACCESS POINT DRIVER DETAILS:
|File Size:||14.4 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
TP-LINK TL-WA801ND V1 ACCESS POINT DRIVER
When router is powered on, press the reset button and hold for 30 seconds.
Use a paper clip or something sharp While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds While still holding the reset button down, turn on the power to the unit again and hold for another TP-Link TL-WA801ND v1 Access Point seconds. In the picture below I marked the flash on the PCB.
- Download TP-Link TL-WAND V1 Router Firmware for OS Independent
- Unbricking a TP-Link TL-WAND v2 – TasksOfOhm
- Download TP-Link TL-WAND V1 Access Point Firmware for OS Independent
- TP-LINK 300mbps Wireless N Access Point Tl-wa801nd
- TP-Link TL-WA801ND
- Supported Versions
- TP-LINK TL-WA801ND v1
To flash it from outside of the device it needs to be desoldered. If you have a soldering tweezers it is a bit easier. In any case you might cause a severe damage on the device.
Do it at your own risk. However, this does not work with v4.
|Asus K550LC||Navigation menu|
|Netis WF2151 USB Network Adapter||Related products|
|Philips SA192555 MP3 Player||Preparing the firmware|
|Packard Bell EasyNote LE11BZ ELANTECH Touchpad||Shop by category|
|Flanders Scientific LM-2430W Monitor||Hardware Highlights|
Use the Workaround below instead. Firmware Workaround A workaround for the locked firmware has been found, based on Keyboardgnome's solution for the WRn. The key is that a command can be injected by including it as part of the SSID.
This process usually works for resetting any router to it's factory setting. It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.
Feature Filter: All User Application RequirementUS. FAQs. How to configure TL-WAND V1, TL-WAND V1 or TL-WAND V1 & V2 as Bridge with AP.
To work as an access point, these devices are 'plug and play'. Please find the default wireless network name and wireless password on the.